QSerialPort Class | Qt Serial Port 5.4

- Qt 5.4
- Qt Serial Port
- C++ Classes
- QSerialPort
- Qt 5.4.2 Reference Documentation

# QSerialPort Class

Provides functions to access serial ports. More...

Header: | #include <QSerialPort>
qmake: | QT += serialport
Since: | Qt 5.1
Inherits: |

Note: All functions in this class are reentrant.

- List of all members, including inherited members
- Obsolete members

## Public Types

enum | BaudRate { Baud1200, Baud2400, Baud4800, Baud9600, ..., UnknownBaud }
enum | DataBits { Data5, Data6, Data7, Data8, UnknownDataBits }
enum | Direction { Input, Output, AllDirections }
flags | Directions
enum | FlowControl { NoFlowControl, HardwareControl, SoftwareControl, UnknownFlowControl }
enum | Parity { NoParity, EvenParity, OddParity, SpaceParity, MarkParity, UnknownParity }
enum | PinoutSignal { NoSignal, TransmittedDataSignal, ReceivedDataSignal, DataTerminalReadySignal, ..., SecondaryReceivedDataSignal }
flags | PinoutSignals
enum | SerialPortError { NoError, DeviceNotFoundError, PermissionError, OpenError, ..., UnknownError }
enum | StopBits { OneStop, OneAndHalfStop, TwoStop, UnknownStopBits }

## Properties

baudRate : qint32 dataBits : DataBits dataTerminalReady : bool error : SerialPortError | flowControl : FlowControl parity : Parity requestToSend : bool stopBits : StopBits

## Public Functions

| QSerialPort(QObject * parent = Q_NULLPTR)
| QSerialPort(const QString & name, QObject * parent = Q_NULLPTR)
| QSerialPort(const QSerialPortInfo & serialPortInfo, QObject * parent = Q_NULLPTR)
virtual | ~QSerialPort()
bool | atEnd() const
qint32 | baudRate(Directions directions = AllDirections) const
qint64 | bytesAvailable() const
qint64 | bytesToWrite() const
bool | canReadLine() const
bool | clear(Directions directions = AllDirections)
void | clearError()
void | close()
DataBits | dataBits() const
SerialPortError | error() const
FlowControl | flowControl() const
bool | flush()
Handle | handle() const
bool | isDataTerminalReady()
bool | isRequestToSend()
bool | isSequential() const
bool | open(OpenMode mode)
Parity | parity() const
PinoutSignals | pinoutSignals()
QString | portName() const
qint64 | readBufferSize() const
bool | sendBreak(int duration = 0)
bool | setBaudRate(qint32 baudRate, Directions directions = AllDirections)
bool | setBreakEnabled(bool set = true)
bool | setDataBits(DataBits dataBits)
bool | setDataTerminalReady(bool set)
bool | setFlowControl(FlowControl flowControl)
bool | setParity(Parity parity)
void | setPort(const QSerialPortInfo & serialPortInfo)
void | setPortName(const QString & name)
void | setReadBufferSize(qint64 size)
bool | setRequestToSend(bool set)
bool | setStopBits(StopBits stopBits)
StopBits | stopBits() const
bool | waitForBytesWritten(int msecs)
bool | waitForReadyRead(int msecs)

## Signals

void | baudRateChanged(qint32 baudRate, QSerialPort::Directions directions)
void | dataBitsChanged(QSerialPort::DataBits dataBits)
void | dataTerminalReadyChanged(bool set)
void | error(QSerialPort::SerialPortError error)
void | flowControlChanged(QSerialPort::FlowControl flow)
void | parityChanged(QSerialPort::Parity parity)
void | requestToSendChanged(bool set)
void | stopBitsChanged(QSerialPort::StopBits stopBits)

## Protected Functions

qint64 | readData(char * data, qint64 maxSize)
qint64 | readLineData(char * data, qint64 maxSize)
qint64 | writeData(const char * data, qint64 maxSize)

## Detailed Description

Provides functions to access serial ports.

You can get information about the available serial ports using the QSerialPortInfo helper class, which allows an enumeration of all the serial ports in the system. This is useful to obtain the correct name of the serial port you want to use. You can pass an object of the helper class as an argument to the setPort() or setPortName() methods to assign the desired serial device.

After setting the port, you can open it in read-only (r/o), write-only (w/o), or read-write (r/w) mode using the open() method.

Note: The serial port is always opened with exclusive access (that is, no other process or thread can access an already opened serial port).

Having successfully opened, QSerialPort tries to determine the current configuration of the port and initializes itself. You can reconfigure the port to the desired setting using the setBaudRate(), setDataBits(), setParity(), setStopBits(), and setFlowControl() methods.

There are a couple of properties to work with the pinout signals namely: QSerialPort::dataTerminalReady, QSerialPort::requestToSend. It is also possible to use the pinoutSignals() method to query the current pinout signals set.

Once you know that the ports are ready to read or write, you can use the read() or write() methods. Alternatively the readLine() and readAll() convenience methods can also be invoked. If not all the data is read at once, the remaining data will be available for later as new incoming data is appended to the QSerialPort's internal read buffer. You can limit the size of the read buffer using setReadBufferSize().

Use the close() method to close the port and cancel the I/O operations.

See the following example:

    int numRead = 0, numReadTotal = 0;
    char buffer[50];

    forever {
        numRead  = serial.read(buffer, 50);

        // Do whatever with the array

        numReadTotal += numRead;
        if (numRead == 0 && !serial.waitForReadyRead())
            break;
    }

If waitForReadyRead() returns false, the connection has been closed or an error has occurred.

Programming with a blocking serial port is radically different from programming with a non-blocking serial port. A blocking serial port does not require an event loop and typically leads to simpler code. However, in a GUI application, blocking serial port should only be used in non-GUI threads, to avoid freezing the user interface.

For more details about these approaches, refer to the example applications.

The QSerialPort class can also be used with QTextStream and QDataStream's stream operators (operator<<() and operator>>()). There is one issue to be aware of, though: make sure that enough data is available before attempting to read by using the operator>>() overloaded operator.

See also QSerialPortInfo.

## Member Type Documentation

### enum QSerialPort::BaudRate

This enum describes the baud rate which the communication device operates with.

Note: Only the most common standard baud rates are listed in this enum.

Constant | Value | Description
--- | --- | ---
`QSerialPort::Baud1200` | `1200` | 1200 baud.
`QSerialPort::Baud2400` | `2400` | 2400 baud.
`QSerialPort::Baud4800` | `4800` | 4800 baud.
`QSerialPort::Baud9600` | `9600` | 9600 baud.
`QSerialPort::Baud19200` | `19200` | 19200 baud.
`QSerialPort::Baud38400` | `38400` | 38400 baud.
`QSerialPort::Baud57600` | `57600` | 57600 baud.
`QSerialPort::Baud115200` | `115200` | 115200 baud.
`QSerialPort::UnknownBaud` | `-1` | Unknown baud. This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.

See also QSerialPort::baudRate.

### enum QSerialPort::DataBits

This enum describes the number of data bits used.

Constant | Value | Description
--- | --- | ---
`QSerialPort::Data5` | `5` | The number of data bits in each character is 5. It is used for Baudot code. It generally only makes sense with older equipment such as teleprinters.
`QSerialPort::Data6` | `6` | The number of data bits in each character is 6. It is rarely used.
`QSerialPort::Data7` | `7` | The number of data bits in each character is 7. It is used for true ASCII. It generally only makes sense with older equipment such as teleprinters.
`QSerialPort::Data8` | `8` | The number of data bits in each character is 8. It is used for most kinds of data, as this size matches the size of a byte. It is almost universally used in newer applications.
`QSerialPort::UnknownDataBits` | `-1` | Unknown number of bits. This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.

See also QSerialPort::dataBits.

### enum QSerialPort::Direction
flags QSerialPort::Directions

This enum describes the possible directions of the data transmission.

Note: This enumeration is used for setting the baud rate of the device separately for each direction on some operating systems (for example, POSIX-like).

Constant | Value | Description
--- | --- | ---
`QSerialPort::Input` | `1` | Input direction.
`QSerialPort::Output` | `2` | Output direction.
`QSerialPort::AllDirections` | `Input | Output` | Simultaneously in two directions.

The Directions type is a typedef for QFlags<Direction>. It stores an OR combination of Direction values.

### enum QSerialPort::FlowControl

This enum describes the flow control used.

Constant | Value | Description
--- | --- | ---
`QSerialPort::NoFlowControl` | `0` | No flow control.
`QSerialPort::HardwareControl` | `1` | Hardware flow control (RTS/CTS).
`QSerialPort::SoftwareControl` | `2` | Software flow control (XON/XOFF).
`QSerialPort::UnknownFlowControl` | `-1` | Unknown flow control. This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.

See also QSerialPort::flowControl.

### enum QSerialPort::Parity

This enum describes the parity scheme used.

Constant | Value | Description
--- | --- | ---
`QSerialPort::NoParity` | `0` | No parity bit it sent. This is the most common parity setting. Error detection is handled by the communication protocol.
`QSerialPort::EvenParity` | `2` | The number of 1 bits in each character, including the parity bit, is always even.
`QSerialPort::OddParity` | `3` | The number of 1 bits in each character, including the parity bit, is always odd. It ensures that at least one state transition occurs in each character.
`QSerialPort::SpaceParity` | `4` | Space parity. The parity bit is sent in the space signal condition. It does not provide error detection information.
`QSerialPort::MarkParity` | `5` | Mark parity. The parity bit is always set to the mark signal condition (logical 1). It does not provide error detection information.
`QSerialPort::UnknownParity` | `-1` | Unknown parity. This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.

See also QSerialPort::parity.

### enum QSerialPort::PinoutSignal
flags QSerialPort::PinoutSignals

This enum describes the possible RS-232 pinout signals.

Constant | Value | Description
--- | --- | ---
`QSerialPort::NoSignal` | `0x00` | No line active
`QSerialPort::TransmittedDataSignal` | `0x01` | TxD (Transmitted Data). This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.
`QSerialPort::ReceivedDataSignal` | `0x02` | RxD (Received Data). This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.
`QSerialPort::DataTerminalReadySignal` | `0x04` | DTR (Data Terminal Ready).
`QSerialPort::DataCarrierDetectSignal` | `0x08` | DCD (Data Carrier Detect).
`QSerialPort::DataSetReadySignal` | `0x10` | DSR (Data Set Ready).
`QSerialPort::RingIndicatorSignal` | `0x20` | RNG (Ring Indicator).
`QSerialPort::RequestToSendSignal` | `0x40` | RTS (Request To Send).
`QSerialPort::ClearToSendSignal` | `0x80` | CTS (Clear To Send).
`QSerialPort::SecondaryTransmittedDataSignal` | `0x100` | STD (Secondary Transmitted Data).
`QSerialPort::SecondaryReceivedDataSignal` | `0x200` | SRD (Secondary Received Data).

The PinoutSignals type is a typedef for QFlags<PinoutSignal>. It stores an OR combination of PinoutSignal values.

See also pinoutSignals(), QSerialPort::dataTerminalReady, and QSerialPort::requestToSend.

### enum QSerialPort::SerialPortError

This enum describes the errors that may be contained by the QSerialPort::error property.

Constant | Value | Description
--- | --- | ---
`QSerialPort::NoError` | `0` | No error occurred.
`QSerialPort::DeviceNotFoundError` | `1` | An error occurred while attempting to open an non-existing device.
`QSerialPort::PermissionError` | `2` | An error occurred while attempting to open an already opened device by another process or a user not having enough permission and credentials to open.
`QSerialPort::OpenError` | `3` | An error occurred while attempting to open an already opened device in this object.
`QSerialPort::NotOpenError` | `13` | This error occurs when an operation is executed that can only be successfully performed if the device is open. This value was introduced in QtSerialPort 5.2.
`QSerialPort::ParityError` | `4` | Parity error detected by the hardware while reading data.
`QSerialPort::FramingError` | `5` | Framing error detected by the hardware while reading data.
`QSerialPort::BreakConditionError` | `6` | Break condition detected by the hardware on the input line.
`QSerialPort::WriteError` | `7` | An I/O error occurred while writing the data.
`QSerialPort::ReadError` | `8` | An I/O error occurred while reading the data.
`QSerialPort::ResourceError` | `9` | An I/O error occurred when a resource becomes unavailable, e.g. when the device is unexpectedly removed from the system.
`QSerialPort::UnsupportedOperationError` | `10` | The requested device operation is not supported or prohibited by the running operating system.
`QSerialPort::TimeoutError` | `12` | A timeout error occurred. This value was introduced in QtSerialPort 5.2.
`QSerialPort::UnknownError` | `11` | An unidentified error occurred.

See also QSerialPort::error.

### enum QSerialPort::StopBits

This enum describes the number of stop bits used.

Constant | Value | Description
--- | --- | ---
`QSerialPort::OneStop` | `1` | 1 stop bit.
`QSerialPort::OneAndHalfStop` | `3` | 1.5 stop bits. This is only for the Windows platform.
`QSerialPort::TwoStop` | `2` | 2 stop bits.
`QSerialPort::UnknownStopBits` | `-1` | Unknown number of stop bits. This value is obsolete. It is provided to keep old source code working. We strongly advise against using it in new code.

See also QSerialPort::stopBits.

## Property Documentation

### baudRate : qint32

This property holds the data baud rate for the desired direction.

If the setting is successful or set before opening the port, returns true; otherwise returns false and sets an error code which can be obtained by accessing the value of the QSerialPort::error property. To set the baud rate, use the enumeration QSerialPort::BaudRate or any positive qint32 value.

Note: If the setting is set before opening the port, the actual serial port setting is done automatically in the QSerialPort::open() method right after that the opening of the port succeeds.

Warning: Setting the AllDirections flag is only supported on the Windows, Windows CE, and Symbian platforms.

Warning: Returns equal baud rate in any direction on Windows, Windows CE, and Symbian.

The default value is Baud9600, i.e. 9600 bits per second.

Access functions:

qint32 | baudRate(Directions directions = AllDirections) const
bool | setBaudRate(qint32 baudRate, Directions directions = AllDirections)

Notifier signal:

void | baudRateChanged(qint32 baudRate, QSerialPort::Directions directions)

### dataBits : DataBits

This property holds the data bits in a frame.

If the setting is successful or set before opening the port, returns true; otherwise returns false and sets an error code which can be obtained by accessing the value of the QSerialPort::error property.

Note: If the setting is set before opening the port, the actual serial port setting is done automatically in the QSerialPort::open() method right after that the opening of the port succeeds.

The default value is Data8, i.e. 8 data bits.

Access functions:

DataBits | dataBits() const
bool | setDataBits(DataBits dataBits)

Notifier signal:

void | dataBitsChanged(QSerialPort::DataBits dataBits)

### dataTerminalReady : bool

This property holds the state (high or low) of the line signal DTR.

Returns true on success, false otherwise. If the flag is true then the DTR signal is set to high; otherwise low.

Note: The serial port has to be open before trying to set or get this property; otherwise false is returned and the error code is set to NotOpenError.

Access functions:

bool | isDataTerminalReady()
bool | setDataTerminalReady(bool set)

Notifier signal:

void | dataTerminalReadyChanged(bool set)

See also pinoutSignals().

### error : SerialPortError

This property holds the error status of the serial port.

The I/O device status returns an error code. For example, if open() returns false, or a read/write operation returns -1, this property can be used to figure out the reason why the operation failed.

The error code is set to the default QSerialPort::NoError after a call to clearError()

Access functions:

SerialPortError | error() const
void | error(QSerialPort::SerialPortError error)
void | clearError()

### flowControl : FlowControl

This property holds the desired flow control mode.

If the setting is successful or set before opening the port, returns true; otherwise returns false and sets an error code which can be obtained by accessing the value of the QSerialPort::error property.

Note: If the setting is set before opening the port, the actual serial port setting is done automatically in the QSerialPort::open() method right after that the opening of the port succeeds.

The default value is NoFlowControl, i.e. no flow control.

Access functions:

FlowControl | flowControl() const
bool | setFlowControl(FlowControl flowControl)

Notifier signal:

void | flowControlChanged(QSerialPort::FlowControl flow)

### parity : Parity

This property holds the parity checking mode.

If the setting is successful or set before opening the port, returns true; otherwise returns false and sets an error code which can be obtained by accessing the value of the QSerialPort::error property.

Note: If the setting is set before opening the port, the actual serial port setting is done automatically in the QSerialPort::open() method right after that the opening of the port succeeds.

The default value is NoParity, i.e. no parity.

Access functions:

Parity | parity() const
bool | setParity(Parity parity)

Notifier signal:

void | parityChanged(QSerialPort::Parity parity)

### requestToSend : bool

This property holds the state (high or low) of the line signal RTS.

Returns true on success, false otherwise. If the flag is true then the RTS signal is set to high; otherwise low.

Note: The serial port has to be open before trying to set or get this property; otherwise false is returned and the error code is set to NotOpenError.

Access functions:

bool | isRequestToSend()
bool | setRequestToSend(bool set)

Notifier signal:

void | requestToSendChanged(bool set)

See also pinoutSignals().

### stopBits : StopBits

This property holds the number of stop bits in a frame.

If the setting is successful or set before opening the port, returns true; otherwise returns false and sets an error code which can be obtained by accessing the value of the QSerialPort::error property.

Note: If the setting is set before opening the port, the actual serial port setting is done automatically in the QSerialPort::open() method right after that the opening of the port succeeds.

The default value is OneStop, i.e. 1 stop bit.

Access functions:

StopBits | stopBits() const
bool | setStopBits(StopBits stopBits)

Notifier signal:

void | stopBitsChanged(QSerialPort::StopBits stopBits)

## Member Function Documentation

### QSerialPort::QSerialPort(QObject * parent = Q_NULLPTR)

Constructs a new serial port object with the given parent.

### QSerialPort::QSerialPort(const QString & name, QObject * parent = Q_NULLPTR)

Constructs a new serial port object with the given parent to represent the serial port with the specified name.

The name should have a specific format; see the setPort() method.

### QSerialPort::QSerialPort(const QSerialPortInfo & serialPortInfo, QObject * parent = Q_NULLPTR)

Constructs a new serial port object with the given parent to represent the serial port with the specified helper class serialPortInfo.

### `[virtual]` QSerialPort::~QSerialPort()

Closes the serial port, if necessary, and then destroys object.

### bool QSerialPort::atEnd() const

Returns true if no more data is currently available for reading; otherwise returns false.

This function is most commonly used when reading data from the serial port in a loop. For example:

    // This slot is connected to QSerialPort::readyRead()
    void QSerialPortClass::readyReadSlot()
    {
        while (!port.atEnd()) {
            QByteArray data = port.read(100);
            ....
        }
    }

See also bytesAvailable() and readyRead().

### qint64 QSerialPort::bytesAvailable() const

Returns the number of incoming bytes that are waiting to be read.

See also bytesToWrite() and read().

### qint64 QSerialPort::bytesToWrite() const

Returns the number of bytes that are waiting to be written. The bytes are written when control goes back to the event loop or when flush() is called.

See also bytesAvailable() and flush().

### bool QSerialPort::canReadLine() const

Returns true if a line of data can be read from the serial port; otherwise returns false.

See also readLine().

### bool QSerialPort::clear(Directions directions = AllDirections)

Discards all characters from the output or input buffer, depending on given directions directions. This includes clearing the internal class buffers and the UART (driver) buffers. Also terminate pending read or write operations. If successful, returns true; otherwise returns false.

Note: The serial port has to be open before trying to clear any buffered data; otherwise returns false and sets the NotOpenError error code.

### void QSerialPort::close()

Note: The serial port has to be open before trying to close it; otherwise sets the NotOpenError error code.

See also QIODevice::close().

### bool QSerialPort::flush()

This function writes as much as possible from the internal write buffer to the underlying serial port without blocking. If any data was written, this function returns true; otherwise returns false.

Call this function for sending the buffered data immediately to the serial port. The number of bytes successfully written depends on the operating system. In most cases, this function does not need to be called, because the QSerialPort class will start sending data automatically once control is returned to the event loop. In the absence of an event loop, call waitForBytesWritten() instead.

Note: The serial port has to be open before trying to flush any buffered data; otherwise returns false and sets the NotOpenError error code.

See also write() and waitForBytesWritten().

### Handle QSerialPort::handle() const

If the platform is supported and the serial port is open, returns the native serial port handle; otherwise returns -1.

Warning: This function is for expert use only; use it at your own risk. Furthermore, this function carries no compatibility promise between minor Qt releases.

This function was introduced in Qt 5.2.

### bool QSerialPort::isSequential() const

Always returns true. The serial port is a sequential device.

### bool QSerialPort::open(OpenMode mode)

Opens the serial port using OpenMode mode, and then returns true if successful; otherwise returns false and sets an error code which can be obtained by calling the error() method.

Note: The method returns false if opening the port is successful, but could not set any of the port settings successfully. In that case, the port is closed automatically not to leave the port around with incorrect settings.

Warning: The mode has to be QIODevice::ReadOnly, QIODevice::WriteOnly, or QIODevice::ReadWrite. Other modes are unsupported.

See also QIODevice::OpenMode and setPort().

### PinoutSignals QSerialPort::pinoutSignals()

Returns the state of the line signals in a bitmap format.

From this result, it is possible to allocate the state of the desired signal by applying a mask "AND", where the mask is the desired enumeration value from QSerialPort::PinoutSignals.

Note: This method performs a system call, thus ensuring that the line signal states are returned properly. This is necessary when the underlying operating systems cannot provide proper notifications about the changes.

Note: The serial port has to be open before trying to get the pinout signals; otherwise returns NoSignal and sets the NotOpenError error code.

See also QSerialPort::dataTerminalReady and QSerialPort::requestToSend.

### QString QSerialPort::portName() const

Returns the name set by setPort() or passed to the QSerialPort constructor. This name is short, i.e. it is extracted and converted from the internal variable system location of the device. The conversion algorithm is platform specific:

Platform | Brief Description
--- | ---
Windows | Removes the prefix "\\.\" or "//./" from the system location and returns the remainder of the string.
Windows CE | Removes the suffix ":" from the system location and returns the remainder of the string.
Symbian | Returns the system location as it is, as it is equivalent to the port name.
Unix, BSD | Removes the prefix "/dev/" from the system location and returns the remainder of the string.

See also setPortName(), setPort(), and QSerialPortInfo::portName().

### qint64 QSerialPort::readBufferSize() const

Returns the size of the internal read buffer. This limits the amount of data that the client can receive before calling the read() or readAll() methods.

A read buffer size of 0 (the default) means that the buffer has no size limit, ensuring that no data is lost.

See also setReadBufferSize() and read().

### `[protected]` qint64 QSerialPort::readData(char * data, qint64 maxSize)

### `[protected]` qint64 QSerialPort::readLineData(char * data, qint64 maxSize)

### bool QSerialPort::sendBreak(int duration = 0)

Sends a continuous stream of zero bits during a specified period of time duration in msec if the terminal is using asynchronous serial data. If successful, returns true; otherwise returns false.

If the duration is zero then zero bits are transmitted by at least 0.25 seconds, but no more than 0.5 seconds.

If the duration is non zero then zero bits are transmitted within a certain period of time depending on the implementation.

Note: The serial port has to be open before trying to send a break duration; otherwise returns false and sets the NotOpenError error code.

See also setBreakEnabled().

### bool QSerialPort::setBreakEnabled(bool set = true)

Controls the signal break, depending on the flag set. If successful, returns true; otherwise returns false.

If set is true then enables the break transmission; otherwise disables.

Note: The serial port has to be open before trying to set break enabled; otherwise returns false and sets the NotOpenError error code.

See also sendBreak().

### void QSerialPort::setPort(const QSerialPortInfo & serialPortInfo)

Sets the port stored in the serial port info instance serialPortInfo.

See also portName() and QSerialPortInfo.

### void QSerialPort::setPortName(const QString & name)

Sets the name of the serial port.

The name of the serial port can be passed as either a short name or the long system location if necessary.

See also portName() and QSerialPortInfo.

### void QSerialPort::setReadBufferSize(qint64 size)

Sets the size of QSerialPort's internal read buffer to be size bytes.

If the buffer size is limited to a certain size, QSerialPort will not buffer more than this size of data. The special case of a buffer size of 0 means that the read buffer is unlimited and all incoming data is buffered. This is the default.

This option is useful if the data is only read at certain points in time (for instance in a real-time streaming application) or if the serial port should be protected against receiving too much data, which may eventually cause the application to run out of memory.

See also readBufferSize() and read().

### bool QSerialPort::waitForBytesWritten(int msecs)

### bool QSerialPort::waitForReadyRead(int msecs)

This function blocks until new data is available for reading and the readyRead() signal has been emitted. The function will timeout after msecs milliseconds.

The function returns true if the readyRead() signal is emitted and there is new data available for reading; otherwise it returns false (if an error occurred or the operation timed out).

See also waitForBytesWritten().

### `[protected]` qint64 QSerialPort::writeData(const char * data, qint64 maxSize)