# Makefile.in generated by automake 1.8.3 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/xine-ui
pkglibdir = $(libdir)/xine-ui
pkgincludedir = $(includedir)/xine-ui
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = i686-pc-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/_xine.m4 $(top_srcdir)/m4/aa.m4 \
	$(top_srcdir)/m4/caca.m4 $(top_srcdir)/m4/codeset.m4 \
	$(top_srcdir)/m4/curl.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/m4/readline.m4 $(top_srcdir)/m4/xft.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(mkdir_p)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__installdirs = "$(DESTDIR)$(docsdir)"
docsDATA_INSTALL = $(INSTALL_DATA)
DATA = $(docs_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
AAINFO = no
AALIB_CFLAGS = 
AALIB_CONFIG = no
AALIB_LIBS = 
ACLOCAL = ${SHELL} /home/kojima/xine-ui-0.99.4/missing --run aclocal-1.8
ALLOCA = 
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /home/kojima/xine-ui-0.99.4/missing --run tar
AUTOCONF = ${SHELL} /home/kojima/xine-ui-0.99.4/missing --run autoconf
AUTOHEADER = ${SHELL} /home/kojima/xine-ui-0.99.4/missing --run autoheader
AUTOMAKE = ${SHELL} /home/kojima/xine-ui-0.99.4/missing --run automake-1.8
AWK = gawk
BUILD_CC = gcc version 3.3.6
BUILD_DATE = Mon 08 Aug 2005 19:40:27
BUILD_INCLUDED_LIBINTL = no
BUILD_LIB_STATIC = 
BUILD_OS = Linux 2.4.31-plamo i686
CACA_CFLAGS = 
CACA_CONFIG = no
CACA_LIBS = 
CATALOGS =  fr.gmo es.gmo pt_BR.gmo de.gmo sk.gmo pl.gmo uk.gmo cs.gmo it.gmo ja.gmo eu.gmo ru.gmo
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -DNDEBUG -Wall -D_FILE_OFFSET_BITS=64 -mcpu=athlon -O3 -pipe -fomit-frame-pointer -falign-functions=4 -falign-loops=4 -falign-jumps=4  -mpreferred-stack-boundary=2 -fexpensive-optimizations -fschedule-insns2 -fno-strict-aliasing -ffast-math -funroll-loops -finline-functions -Wpointer-arith -Wnested-externs -Wcast-align -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes   
CPP = gcc -E
CPPFLAGS = -DFT_FREETYPE_H
CURL_CFLAGS = 
CURL_CONFIG = /usr/bin/curl-config
CURL_LIBS = -L/usr/lib -lcurl -lssl -lcrypto -ldl -lssl -lcrypto -ldl -lz
CYGPATH_W = echo
DATADIRNAME = share
DATA_DIR = /usr/share
DEBUG_CFLAGS = -Wall -D_FILE_OFFSET_BITS=64 -mcpu=athlon -O    -g -DDEBUG
DEFS = -DHAVE_CONFIG_H
DEPCOMP = depcomp
DEPDIR = .deps
DIRECTFB_CFLAGS = 
DIRECTFB_LIBS = 
DYNAMIC_LD_LIBS = -ldl
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
GENCAT = gencat
GICONV_BSD_LIBS = 
GLIBC21 = yes
GMOFILES =  fr.gmo es.gmo pt_BR.gmo de.gmo sk.gmo pl.gmo uk.gmo cs.gmo it.gmo ja.gmo eu.gmo ru.gmo
GMSGFMT = /usr/bin/msgfmt
HAVE_AA_FALSE = 
HAVE_AA_TRUE = #
HAVE_CACA_FALSE = 
HAVE_CACA_TRUE = #
HAVE_CURL_FALSE = #
HAVE_CURL_TRUE = 
HAVE_DIRECTFB_FALSE = 
HAVE_DIRECTFB_TRUE = #
HAVE_GETOPT_LONG_FALSE = #
HAVE_GETOPT_LONG_TRUE = 
HAVE_GICONV_FALSE = #
HAVE_GICONV_TRUE = 
HAVE_NCURSES_FALSE = #
HAVE_NCURSES_TRUE = 
HAVE_READLINE_FALSE = #
HAVE_READLINE_TRUE = 
HAVE_X11_FALSE = #
HAVE_X11_TRUE = 
HAVE_XF86VIDMODE_FALSE = #
HAVE_XF86VIDMODE_TRUE = 
HAVE_XINERAMA_FALSE = #
HAVE_XINERAMA_TRUE = 
HAVE_XTESTEXTENSION_FALSE = #
HAVE_XTESTEXTENSION_TRUE = 
HAVE_XV_FALSE = 
HAVE_XV_TRUE = #
INCLUDED_INTL_FALSE = 
INCLUDED_INTL_TRUE = #
INCLUDES = -I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/src -I$(top_builddir)/src -I$(top_srcdir)/src/common -I$(top_builddir)/src/common -I$(top_srcdir)/src/xitk/xine-toolkit -I$(top_builddir)/src/xitk/xine-toolkit -I$(prefix)/include $(INTLDIR)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INSTOBJEXT = .mo
INTLBISON = bison
INTLLIBS = 
INTLOBJS = 
INTL_LIBTOOL_SUFFIX_PREFIX = l
LDFLAGS = 
LIBICONV = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = ./ltmain.sh
LIRC_INCLUDE = 
LIRC_LIBS = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/kojima/xine-ui-0.99.4/missing --run makeinfo
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
NCURSES_LIB = -lncurses
NET_LIBS = -lnsl 
NVTVSIMPLE_CFLAGS = 
NVTVSIMPLE_LIBS = 
OBJEXT = o
PACKAGE = xine-ui
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PASS1_CFLAGS = 
PASS2_CFLAGS = 
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
POFILES =  fr.po es.po pt_BR.po de.po sk.po pl.po uk.po cs.po it.po ja.po eu.po ru.po
POSUB = po
RANLIB = ranlib
READLINE_INCLUDES = -I/usr/include/readline
READLINE_LIBS =  -lreadline
SET_MAKE = 
SHELL = /bin/sh
SPEC_VERSION = 0.99.4
STATIC = 
STRIP = strip
SYSCONF_DIR = /usr/etc
TAR = tar
TAR_NAME = xine-ui-0.99.4
THREAD_CFLAGS = 
THREAD_LIBS = -lpthread
USE_INCLUDED_LIBINTL = no
USE_NLS = yes
VERSION = 0.99.4
WITH_XFT_FALSE = #
WITH_XFT_TRUE = 
XFT_CFLAGS = -I/usr/X11R6/include -I/usr/X11R6/include/freetype2  
XFT_CONFIG = 
XFT_LIBS = -L/usr/X11R6/lib -lXft -lfreetype -lXrender -lfontconfig  
XGETTEXT = /usr/bin/xgettext
XINE_ACFLAGS = -I /usr/share/aclocal
XINE_CFLAGS = -I/usr/include
XINE_CONFIG = /usr/bin/xine-config
XINE_DOCDIR = /usr/share/doc/xine-ui
XINE_LIBS = -L/usr/lib -lxine -lz -lnsl -lpthread -lrt
XINE_LOCALE = /usr/share/locale
XINE_LOGO_MRL = file:/usr/share/xine/skins/xine-ui_logo.mpv
XINE_MAJOR = 0
XINE_MINOR = 99
XINE_OXINEDIR = /usr/share/xine/oxine
XINE_SCRIPTDIR = /usr/share/xine/scripts
XINE_SKINDIR = /usr/share/xine/skins
XINE_SPLASH = /usr/share/xine/skins/xine_splash.png
XINE_SUB = 4
XINE_VISDIR = /usr/share/xine/visuals
XTEST_LIBS = -lXtst
XV_LIB = -lXv
X_CFLAGS =  -I/usr/X11R6/include 
X_EXTRA_LIBS = 
X_LIBS = -lXext  -L/usr/X11R6/lib
X_PRE_LIBS =  -lSM -lICE -lXinerama -lXxf86vm  -lpng -lz -lm
ac_ct_CC = gcc
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
includedir = ${prefix}/include
infodir = ${prefix}/share/info
install_sh = /home/kojima/xine-ui-0.99.4/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/share/man
mkdir_p = mkdir -p -- .
oldincludedir = /usr/include
prefix = /usr
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target = i686-pc-linux-gnu
target_alias = 
target_cpu = i686
target_os = linux-gnu
target_vendor = pc
SUBDIRS = man
EXTRA_DIST = $(docs_DATA)
docsdir = /usr/share/doc/xine-ui
docs_DATA = \
	README.config_en \
	README_en \
	README_cs \
	README_es \
	README_pl \
	README_it \
	README_fi \
	README_uk \
	README_fr \
	README_de \
	README.en.0.Introduction \
	README.en.5.xine-ui \
	README.en.10.Remote_control \
	README.en.15.MRLs \
	README.en.20.DVD \
	README.en.25.VideoCD \
	README.en.30.Advanced \
	README.en.32.Window_managers \
	README.en.35.Legal_issues \
	README.cs.0.Introduction \
	README.cs.5.xine-ui \
	README.cs.10.Remote_control \
	README.cs.15.MRLs

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-docsDATA: $(docs_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docsdir)" || $(mkdir_p) "$(DESTDIR)$(docsdir)"
	@list='$(docs_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(docsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docsdir)/$$f'"; \
	  $(docsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docsdir)/$$f"; \
	done

uninstall-docsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(docs_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f '$(DESTDIR)$(docsdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docsdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if (etags --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	else \
	  include_option=--include; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || mkdir "$(distdir)/$$subdir" \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="../$(top_distdir)" \
	        distdir="../$(distdir)/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(docsdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

clean-generic:

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-docsDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-docsDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-recursive ctags \
	ctags-recursive distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-docsDATA install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-docsDATA \
	uninstall-info-am


debug:
install-debug: install

mostlyclean-generic:
	-rm -f *~ \#* .*~ .\#*

maintainer-clean-generic:
	-@echo "This command is intended for maintainers to use;"
	-@echo "it deletes files that may require special tools to rebuild."
	-rm -f Makefile.in
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
