

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: December 10 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: OS/2 IBM
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
      s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520,
      ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548,
      ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300,
      mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
      Voodoo Banshee, Voodoo3, smi, generic
xf86-OS/2: gethostname() returns: "holger"
xf86-OS/2: DISPLAY to listen is set to: "HOLGER:0.0"
xf86-OS/2: gethostbyname() returns the following data:
xf86-OS/2:    official host name: "holger.gmd.de"
xf86-OS/2:                 alias: "holger"
xf86-OS/2:    addr type = 2,  addr length = 4
xf86-OS/2:      Internet address: "129.26.248.51"
xf86-OS/2: Console opened
xf86-OS/2: Keyboard opened
xf86-OS/2: Started Vio thread, Tid=2
xf86-OS/2: Started hard error Vio mode monitor thread, Tid=3
xf86-OS/2: Started Kbd monitor thread, Tid=4
xf86-OS/2: Opened kbd monitor, rc=0
xf86-OS/2: Kbd monitor registered, rc=0
xf86-OS/2: Kbd Queue created, rc=0
xf86-OS/2: Started Kbd bit-bucket thread, Tid=5
XF86Config: f:/XFree86/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(de)" (overrides other XKB settings)
(**) OsMouse selected for mouse input
(**) SVGA: Graphics device ID: "Diamond Viper 330"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "f:/XFree86/lib/X11/fonts/misc/,f:/XFree86/lib/X11/fonts/75dpi/:unscaled,f:/XFree86/lib/X11/fonts/100dpi/:unscaled,f:/XFree86/lib/X11/fonts/Type1/,f:/XFree86/lib/X11/fonts/Speedo/,f:/XFree86/lib/X11/fonts/75dpi/,f:/XFree86/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: NVidia/SGS-Thomson Riva128 rev 16, Memory @ 0xe1000000, 0xe3000000
The Process Identification Number is 39300.
The Process Identification Number is 39302.
X connection to :0.0 broken (explicit kill or server shutdown).

X connection to :0.0 broken (explicit kill or server shutdown).



