# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6.3/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath	"/usr/X11R6.3/lib/X11/fonts/misc/"
FontPath	"/usr/X11R6.3/lib/X11/fonts/75dpi/:unscaled"
FontPath	"/usr/X11R6.3/lib/X11/fonts/100dpi/:unscaled"
FontPath	"/usr/X11R6.3/lib/X11/fonts/Type1/"
FontPath	"/usr/X11R6.3/lib/X11/fonts/Speedo/"
FontPath	"/usr/X11R6.3/lib/X11/fonts/75dpi/"
FontPath	"/usr/X11R6.3/lib/X11/fonts/100dpi/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    DontZoom

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#	DisableVidModeExtension

# Uncomment this to enable the use of a non-local xvidtune client.

#	AllowNonLocalXvidtune

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#	DisableModInDev

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#	AllowNonLocalModInDev

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol	"Standard"
    AutoRepeat	500 5

# Let the server do the NumLock processing.  This should only be required
# when using pre-R6 clients
#    ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift, 
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
    XkbModel    "pc102"
# If you have a Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"


# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    XkbOptions  ""

EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"

    Protocol	"PS/2"
    Device	"/dev/mouse"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate	9600
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
#    Emulate3Timeout	50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Xinput section -- this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "Xinput"
#    SubSection "WacomStylus"
#        Port "/dev/ttyS1"
#        DeviceName "Wacom"
#    EndSubSection
#    SubSection "WacomCursor"
#        Port "/dev/ttyS1"
#    EndSubSection
#    SubSection "WacomEraser"
#        Port "/dev/ttyS1"
#    EndSubSection
#
#    SubSection "Elographics"
#        Port "/dev/ttyS1"
#        DeviceName "Elo"
#        MinimumXPosition 300
#        MaximumXPosition 3500
#        MinimumYPosition 300
#        MaximumYPosition 3500
#        Screen 0
#        UntouchDelay 10
#        ReportDelay 10
#    EndSubSection
#   
#    SubSection "Joystick"
#        Port "/dev/joy0"
#        DeviceName "Joystick"
#        TimeOut 10
#        MinimumXPosition 100
#        MaximumXPosition 1300
#        MinimumYPosition 100
#        MaximumYPosition 1100
#        # CenterX 700
#        # CenterY 600
#        Delta 20
#    EndSubSection
#
# The Mouse Subsection contains the same type of entries as the
# standard Pointer Section (see above), with the addition of the
# DeviceName entry.
#
#    SubSection "Mouse"
#        Port "/dev/mouse2"
#        DeviceName "Second Mouse"
#        Protocol "Logitech"
#    EndSubSection
# EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"
    Identifier "Medium res 17inch  DG-26059 (30-65kHz) DA1765VA"
    VendorName "Unknown"
    ModelName "DA1765VA/DA1765VAF"
    HorizSync 30-65
    VertRefresh 50-100
    Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806
    Modeline "1024x768" 65 1024 1032 1208 1288 768 768 773 798
    Modeline "800x600" 50 800 856 976 1040 600 637 643 668
    Modeline "800x600" 40 800 840 968 1056 600 601 605 628
    Modeline "640x480" 31 640 664 704 832 480 489 492 520
    Modeline "640x480" 28 640 680 720 864 480 488 491 521
    Modeline "640x480" 25 640 664 760 800 480 491 493 525
EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "SVGA"
    VendorName "unknown"
    BoardName "Generic SVGA"
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Driver "SVGA"
    Device "SVGA"
    Monitor "Medium res 17inch  DG-26059 (30-65kHz) DA1765VA"
    SubSection "Display"
        Option "no_mmio"
        Option "med_dram"
        Depth 8
        Virtual 1024 768
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
EndSection


